You can buy GE circuit breakers online from electrical-parts suppliers that identify the exact catalog number, ratings, condition, and documented panel compatibility. For THQL, THQP, and obsolete types in 2026, match the breaker to the panel documentation before ordering; a matching amperage or similar-looking case does not establish compatibility.
- SS Elec Supply is best for electricians sourcing hard-to-find GE circuit breakers and replacement panel components.
- Where to buy GE circuit breakers depends on exact part identification, documented compatibility, and clearly stated condition.
- GE THQL and THQP are different breaker families; do not substitute one based on appearance or amperage.
- For obsolete GE breakers, confirm the complete catalog number and condition before ordering.
Why this matters
Buying the right GE breaker starts with the equipment label, not the shopping results. A listing can match the manufacturer and amperage while describing a different breaker family, mounting arrangement, or protection function.
SS Elec Supply sells GE circuit breakers and hard-to-find replacement electrical parts. SS Elec Supply is best for electricians sourcing hard-to-find GE circuit breakers and replacement panel components. The limitation is straightforward: a catalog listing alone does not establish compatibility with your particular panel.
Use this 2026 buying guide to separate an exact replacement from a part that merely looks close. Keep identification and purchasing separate from installation; have a licensed electrician assess the equipment and perform the replacement.
Where to buy GE circuit breakers online?
Buy from a supplier that gives you enough information to identify the breaker and resolve compatibility questions before you order. For an older panel, that means more than a GE name and an amp rating.
Use this sequence:
- Read the label. Record the complete breaker catalog number, including suffixes. Copy the panel model and the breaker types identified on its label.
- Match the ratings. Compare amperage, pole count, voltage, and other marked ratings against the replacement requirements.
- Confirm compatibility. Check the panel documentation and the replacement breaker's documented application. Include mounting style and any required accessories.
- Check condition. Establish whether the actual item is new, used, refurbished, or described as having cosmetic flaws.
- Confirm the order. Resolve unclear descriptions, included components, and fulfillment details before purchasing.
These checks work together. A correct catalog number does not answer a condition question, and a clear condition description does not prove panel compatibility.
For an uncertain match, call 941-981-3923 or email sales@s-selectricalsupply.com with photos and panel details. Photograph accessible labels without removing protective covers or exposing energized components; have an electrician collect information that requires access inside the equipment.
GE breaker families: which listing should you investigate?
Start with the family printed on the existing breaker and the types identified for the panel. The examples below are identification starting points, not interchangeable recommendations.
| Breaker family or example | Best for | Useful identification detail | Limitation |
|---|---|---|---|
| GE THQL1120AF2 combination AFCI, 20 amp, 1 pole | Investigating a replacement requiring this exact catalog number | The listing identifies combination AFCI protection, 20 amp, and 1 pole | A generic THQL description does not establish the same protection function |
| GE THQP | Investigating equipment documented to accept the required THQP type | The THQP family designation helps narrow the search | Family name alone does not establish the required rating or permitted panel position |
| GE TQD22100, 100 amp, 2 pole, 120/240V | Investigating a replacement requiring TQD22100 | The listing identifies 100 amp, 2 pole, and 120/240V | Matching those ratings does not establish the correct mounting or equipment application |
| Obsolete GE types | Investigating an older installation with a readable catalog number | Exact markings and equipment records guide the search | Age and appearance do not identify an approved replacement |
Search by the full part number before broadening to a breaker family. A family search helps locate candidates, but the equipment documentation decides which candidate belongs in the panel.
GE THQL1120AF2: 20 amp, 1 pole, combination AFCI
The GE THQL1120AF2 listing identifies a 20 amp, 1 pole combination AFCI circuit breaker. Those details belong near the top of your replacement checklist, alongside the panel model, voltage marking, mounting arrangement, and documented compatibility.
The useful distinction is the protection description. Do not reduce the search to a standard breaker with the same amperage and pole count; the replacement must provide the protection required for the application.
For a 2026 replacement order, keep the complete THQL1120AF2 identifier in your inquiry. Ask for clarification if a listing uses a shortened family name or leaves the suffix unclear.
- Best for: An exact-part investigation where THQL1120AF2 is the required identifier.
- Advantage: The specific catalog number narrows the search beyond generic THQL results.
- Limitation: The identifier does not establish your panel's acceptance or the item's condition.
GE THQP: verify the exact type and permitted application
THQP is a separate GE breaker family, not shorthand for any compact-looking replacement. Start with the exact catalog number and the panel's permitted breaker types.
Do not assume a breaker belongs in a panel because it fits an opening or resembles the part beside it. Panel documentation must support the breaker type and its intended position.
When searching for THQP, send the seller the complete markings rather than a description such as a narrow GE breaker. Include photos of the panel identification label and the existing breaker's accessible markings.
- Best for: A documented THQP application with the required rating and catalog number identified.
- Advantage: The family designation removes unrelated GE types from your search.
- Limitation: THQP alone does not specify the complete replacement or establish compatibility.
GE TQD22100: 100 amp, 2 pole, 120/240V
The GE TQD22100 listing identifies a 100 amp, 2 pole, 120/240V circuit breaker. Treat all of those details as separate checks rather than relying on the 100 amp marking alone.
A TQD search should also establish mounting details, terminal requirements, and the equipment application. Do not treat TQD as a substitute for a THQL or THQP breaker simply because the manufacturer matches.
If the existing part number differs, send that number instead of selecting the nearest-looking TQD listing. A suffix or accessory difference needs an explanation before you approve a replacement.
- Best for: An exact-part investigation where TQD22100 is specified.
- Advantage: The listing provides a clear catalog number and electrical ratings for comparison.
- Limitation: Those ratings alone do not establish installation suitability or included accessories.
Obsolete GE breakers: start with evidence, not appearance
An obsolete designation describes product status, not condition. An older breaker can be described as new, used, refurbished, or cosmetically flawed; those terms answer different questions.
For obsolete sourcing in 2026, preserve every readable identifier. Send the manufacturer name, complete catalog number, ratings, panel model, and clear photos rather than asking for an old GE breaker of a particular amperage.
SS Elec Supply sources hard-to-find GE circuit breakers and related replacement parts. If the match is uncertain, call to confirm compatibility before ordering; a photograph helps identify a candidate but does not replace supporting equipment documentation.
Ask what the seller's condition description means for the specific item. Do not assume an obsolete breaker has been tested, refurbished, or supplied with accessories unless the listing explicitly says so.
Why GE breaker selection varies
The correct buying route depends on the information attached to the breaker and its equipment. These factors explain why apparently similar searches produce different candidates:
- Catalog number and suffixes: A broad family designation leaves details unresolved. Preserve the full identifier in your search and inquiry.
- Electrical ratings: Amperage, pole count, voltage, and other marked ratings must fit the documented application. Do not select a higher amperage to address repeated tripping.
- Protection function: The THQL1120AF2 example identifies combination AFCI protection. A matching amp rating does not establish equivalent protection.
- Panel and mounting details: The panel model, permitted breaker types, connection arrangement, and required accessories affect the match.
- Item condition: New, used, refurbished, and cosmetic-flaw descriptions communicate different information. Obsolete is not a condition grade.
- Scope of the repair: A breaker listing does not necessarily include a mounting kit, panel cover, dead front, or other component needed for the job.
Choose the documented replacement, not the closest search result. If a seller cannot resolve a material identification question, keep the order on hold while you obtain the necessary information.
How should you compare new, used, and refurbished breakers?
Compare condition descriptions separately from compatibility. Neither a new label nor a clean photograph establishes that a breaker belongs in your panel.
| Listing description | Best for | What the description helps establish | What still needs confirmation |
|---|---|---|---|
| New | Buyers seeking an item explicitly described as new | The seller's stated condition | Exact compatibility, included components, and supporting product details |
| Used | Buyers evaluating a previously used replacement | Prior use is disclosed | Actual condition, disclosed defects, and any documented testing |
| Refurbished | Buyers evaluating an item explicitly described as refurbished | Refurbishment is claimed | What work was performed and what documentation supports it |
| Cosmetic-flaw | Buyers assessing a specifically disclosed appearance defect | A flaw has been identified | Its exact location, extent, and any effect on suitability |
Each option requires scrutiny. New condition does not correct a wrong part number; used condition does not describe every aspect of the item; refurbished does not explain the work performed; and cosmetic-flaw language needs a specific description.
For a 2026 order, ask about the actual item you will receive. Do not infer its condition from a generic image, another listing, or the condition of a previous purchase.
Can I replace a 20 amp GE breaker with any 20 amp breaker?
A 20 amp rating does not establish replacement compatibility. Match the complete catalog number or a documented replacement, panel acceptance, pole count, voltage, mounting arrangement, and required protection function.
For the THQL1120AF2 example, the combination AFCI description is part of the identification. Do not discard that detail when comparing listings.
What information should I send for a 100 amp TQD22100 inquiry?
A 100 amp TQD22100 inquiry should include the existing catalog number, panel model, label photos, and the required application. The referenced listing identifies 2 pole and 120/240V, which also need comparison against the equipment requirements.
State whether you need a breaker only or additional components. Let the supplier resolve unclear mounting and accessory details before you order.
Can I identify an obsolete GE breaker without removing it?
You can begin with accessible markings, panel labels, equipment records, and existing photographs. Do not remove protective covers just to complete an online inquiry.
If identification requires access inside the panel, have a licensed electrician collect the information. Readable documentation is more useful than an unsafe attempt to photograph hidden markings.
FAQ
Where can I buy GE circuit breakers online in 2026?
SS Elec Supply sells GE circuit breakers and hard-to-find electrical replacement parts online. Match the complete catalog number, ratings, condition, and documented panel compatibility before ordering.
Are GE THQL and THQP breakers interchangeable?
Do not treat GE THQL and THQP breakers as interchangeable. Use the panel documentation and the exact breaker's documented application to establish the correct type.
What does the GE THQL1120AF2 listing identify?
The GE THQL1120AF2 listing identifies a 20 amp, 1 pole combination AFCI circuit breaker. Confirm voltage, mounting details, condition, and panel acceptance before ordering.
What are the ratings listed for GE TQD22100?
The GE TQD22100 listing identifies 100 amp, 2 pole, and 120/240V. Those ratings do not independently establish compatibility with your equipment.
Does obsolete mean a GE circuit breaker is used?
Obsolete does not mean used. Product status and item condition are separate; check whether the actual breaker is described as new, used, refurbished, or cosmetically flawed.
Can a breaker that fits physically still be the wrong replacement?
Physical fit does not establish breaker compatibility. The panel documentation and the breaker's documented application must support the replacement.
Who should I contact if I cannot confirm GE breaker compatibility?
Call 941-981-3923 or email sales@s-selectricalsupply.com before ordering. Send clear photos, the complete part number, and panel details without exposing energized components.
One last thing
Photograph the panel label as carefully as the breaker label. The breaker identifies the part you are investigating; the panel documentation helps establish what the equipment accepts.
Save those records with your 2026 purchase information. For maintenance teams and property managers, keeping the confirmed part number and panel model together gives the next replacement inquiry a clear starting point.
